I'm looking for slotted flat wood screws with a 1/8" head diameter and 1/2" length. Does anyone know the correct size screw with those dimensions and a source? I know Micro-Mark carries some miniature hardware, but they don't provide head diameter information.
Here is an image of the style I need, although a sheet metal screw would work as long at it has the same flat, slottted head style and dimensions of 1/8"
Ed have a look at this chart.
https://www.jamestowndistributors.com/userportal/document.do?docId=270 (https://www.jamestowndistributors.com/userportal/document.do?docId=270)
Also look at this list of brass wood screws
http://www.leevalley.com/en/home/OnlineCatalog.aspx?id=710b63a6 (http://www.leevalley.com/en/home/OnlineCatalog.aspx?id=710b63a6) go to hardware page 438
mike
Google or eBay?
Thanks guys. Looks like my choices are #0 with a .119 diameter head, which is a tad small, or a #1, which has a .146 head, a bit large. I've ordered some of each from Lee Valley, and will see which looks the best.
You could always take the larger ones, chuck them into a drill, and then file them while spinning. Unless you need a large quantity of them.
That was my back-up plan, but the screws I got from Lee Valley are fine. Thanks.