Print Page - 3/32" thick Walnut?

Title: 3/32" thick Walnut?
Post by: lab-dad on March 19, 2013, 08:22:17 AM

Looking for either a sheet of or 3/4" wide "planks"?
It needs to be at least 18" long too.
I cant mill my own, just too thin for my equipment.
Midwest & MM & Model expo used to have but no more, searching did not find any.
-Marty

Title: Re: 3/32" thick Walnut?
Post by: Mr Potato Head on March 19, 2013, 10:11:23 AM

www.woodcraft.com
You might even have one near you?
Gil

Title: Re: 3/32" thick Walnut?
Post by: lab-dad on March 19, 2013, 10:22:48 AM

No 3/32" :(
Mj

Title: Re: 3/32" thick Walnut?
Post by: Mr Potato Head on March 19, 2013, 11:45:56 AM

would you like me to send you some?
Gil
If So size please W X L X T X Q

Title: Re: 3/32" thick Walnut?
Post by: Lawton Maner on March 19, 2013, 04:02:27 PM

Don't know if they still have it, but Northeast Scale Lumber used to sell it.

Title: Re: 3/32" thick Walnut?
Post by: james_coldicott on March 20, 2013, 02:12:39 AM

Hi Marty,

can't help you in the USA but for anyone looking for similar in the UK it is here...

http://www.cornwallmodelboats.co.uk/acatalog/walnut_sheet.html (http://www.cornwallmodelboats.co.uk/acatalog/walnut_sheet.html)

It may be worth exploring the model shipbuilding route over there.

James

Title: Re: 3/32" thick Walnut?
Post by: lab-dad on March 20, 2013, 08:19:02 AM

No longer available at nottheastern.
Luckily Mr. Potato has graciously agreed to mill some up!
Marty

Westlake Publishing Forums

General Category => General Forums => Topic started by: lab-dad on March 19, 2013, 08:22:17 AM