Westlake Publishing Forums

General Category => The Gallery => Topic started by: jacq01 on April 02, 2008, 06:32:32 AM

Title: Jacq's layout part 8
Post by: jacq01 on April 02, 2008, 06:32:32 AM

   The upper mill,

     (https://www.finescalerr.com/smf/proxy.php?request=http%3A%2F%2Fimg122.imageshack.us%2Fimg122%2F2540%2Fimg0263small2hu.jpg&hash=a4ababf346ae34283b5794e8952315da614d188c)

     The base of the rockface with the upper mill


     (https://www.finescalerr.com/smf/proxy.php?request=http%3A%2F%2Fimg122.imageshack.us%2Fimg122%2F852%2Fimg0264small5nq.jpg&hash=89ecb9a464bb811735e10daefee28a402eb9c2db)

     A mock up of the mill.  Criticts ranged from too large to too high.
     The final building was approx. 10% larger than the mock up shown.


    (https://www.finescalerr.com/smf/proxy.php?request=http%3A%2F%2Fimg122.imageshack.us%2Fimg122%2F2299%2Fimg0270small9te.jpg&hash=e4352b0c93522b6df5abf26068a8c2ba2b3961a5)
   
     The photo that triggered the idea of the upper mill


      (https://www.finescalerr.com/smf/proxy.php?request=http%3A%2F%2Fimg365.imageshack.us%2Fimg365%2F1072%2Frockfacing26lm.jpg&hash=c72b2a1d9ed9d476488445a353d832c86041ab72)
     
    The rock face was done on a Saturday afternoon. No one at home, a couple
    of beers, nice music and the carving knife started leading it's own life.



     
     (https://www.finescalerr.com/smf/proxy.php?request=http%3A%2F%2Fimg261.imageshack.us%2Fimg261%2F8335%2F3mills18nh.jpg&hash=3a9fd197a93a15ff5faec360fe6eafcf7e32ce60)

     The final shapes for the upper mill and blacksmith's shop in position.



      (https://www.finescalerr.com/smf/proxy.php?request=http%3A%2F%2Fimg528.imageshack.us%2Fimg528%2F2957%2Fimg0364medium0gt.jpg&hash=f4375e958660c91a54fcbd24a87a341c72579eeb)

      The upper mil without details prelimenary in position. 
      Building time to this stage 3 days.



      (https://www.finescalerr.com/smf/proxy.php?request=http%3A%2F%2Fimg528.imageshack.us%2Fimg528%2F9398%2Fimg0362medium4ir.jpg&hash=cc7343762b3c60a967e590b1b05a887c5e2147d9)

      Side of building and pusher engine track.



      (https://www.finescalerr.com/smf/proxy.php?request=http%3A%2F%2Fimg86.imageshack.us%2Fimg86%2F3850%2Fda074948ll1.jpg&hash=38909f38b44279c49548bf95136c96e560b89b5f)
 
      The finished setting similar as the photo above   



      (https://www.finescalerr.com/smf/proxy.php?request=http%3A%2F%2Fimg509.imageshack.us%2Fimg509%2F1203%2Fda074950rz8.jpg&hash=9ed1364c168b27dbf166121c1f5544f6c400f0e8)

      The mill in it's definitive setting with trees, shrubs, grass and waterfalls



      (https://www.finescalerr.com/smf/proxy.php?request=http%3A%2F%2Fimg156.imageshack.us%2Fimg156%2F8735%2Fda074956nm5.jpg&hash=c6d060c8617d7cbc832c0d8353e81ae9b746e154)
   
      The three mill together

      (https://www.finescalerr.com/smf/proxy.php?request=http%3A%2F%2Fimg238.imageshack.us%2Fimg238%2F695%2Fp1030142ks3.jpg&hash=9b2e770dc10654cf92019d9817dc6ca6c9265b28)




      (https://www.finescalerr.com/smf/proxy.php?request=http%3A%2F%2Fimg214.imageshack.us%2Fimg214%2F5758%2Fimg0578qt6.jpg&hash=b7ff352961847af7c15d58d29407e432eb3d79c2)
 
      Water on it's way down.

   
      Jacq


     
Title: Re: Jacq's layout part 8
Post by: marc_reusser on April 03, 2008, 01:35:07 PM
Good God!...this thing just keeps going ;).  I have completely run out of superlatives.

I can only repeat myself. Beautiful and inspirational.

Marc
Title: Re: Jacq's layout part 8
Post by: John McGuyer on April 03, 2008, 09:28:43 PM
Jacq,

I also appreciate those 'in progress' shots. Good to know you didn't create it in 6 days and rest on the 7th.

John