Here is a link to my photobucket account that holds the pictures of my O scale build.
http://s185.photobucket.com/albums/x169/madmike3434/511%20merry%20mermaid%20diner/
This was another of the DINER / EATERY dioramas i was building in early winter 2010. This started life as a TOM YORKE hydrocal O scale kit called OUISI's BAR that he released around 2000. All the windows were bricked in so i decided to open them up and install grandt lines very large diamond patterned windows . The short front wall was very tricky to open up and i used a dremel cutoff wheel with the back of the wall supported with 1/4" square basswood piece epoxied to it.
I took the one inch tall foundation casting and carefully cut it in half with my band saw. I used the other half under the scratch built rear addition i designed that houses the cooking area.
The main signage is a pre-painted rubber mermaid i found on ebay that the story goes by the diner owner, it came off a large 4 master sailing ship. The lace curtains in the windows are from builders in scale .
madmike3434........mike lynch
now that i know how to post pictures i thought i would post this picture of one of my favorite structures too the original post
mike
and here is another view from the side
mike