Bill Gill
|
 |
« Reply #75 on: June 22, 2015, 06:23:17 AM » |
|
Russ, Marty & Marc, Great collaboration! I've been following this project silently, not knowing enough about any of it to comment coherently, but your combined results speak for themselves!
|
|
|
Logged
|
|
|
|
darrylhuffman
|
 |
« Reply #76 on: June 25, 2015, 07:06:09 AM » |
|
You guys are amazing.
|
|
|
Logged
|
|
|
|
lab-dad
|
 |
« Reply #77 on: June 25, 2015, 08:23:06 AM » |
|
So who is gonna be the first to hit the "PRINT" button? So we can see if this is going to be feasible?
I tried working on the radiator; to make it useful in 1/16" (solid) and be printable but gave up. I think the outside should be printed but the "core" made differently.
-Mj
|
|
« Last Edit: June 25, 2015, 08:38:31 AM by lab-dad »
|
Logged
|
|
|
|
finescalerr
|
 |
« Reply #78 on: June 25, 2015, 12:39:28 PM » |
|
Marty (and everyone else), I was thinking about keeping the core "solid" (thin walls each side), painting that area black, and applying screen over the painted area. Maybe it would look better with a few layers of screen instead of a "solid" center but I can't remember whether such a radiator would have a "see-through" quality.
A much more difficult problem would be the radiator guard. Even with a bar stock thickness of 1/2-inch it probably would be much too thin to print in metal. Perhaps it could be laser cut ... but what material?
Russ
|
|
|
Logged
|
|
|
|
lab-dad
|
 |
« Reply #79 on: June 26, 2015, 08:48:35 AM » |
|
I dont know how to print or draw the file so shapeways would print the "inside" of the radiator hollow.
I also think the radiator is not quite "right" (the tanks) but I need to look into this further....
I "was" planning on doing the guard out of brass strip, but even at 1/16th that is still pretty thin. Unfortunately it is thick in the wrong dimension.
I will be interested to see what suggestions we get for the 1/32 version. FWIW the guard is .040" x .012" in 1/32 according to measurements from Unc's 1:1 drawing.
Mj
|
|
|
Logged
|
|
|
|
Lawton Maner
|
 |
« Reply #80 on: June 26, 2015, 07:08:50 PM » |
|
Marty:
The Staples here in Williamsburg, Va has an entry level 3D printer set up as a demo. With a couple of larger solid pieces they crank out, the interior is printed as a hollow honeycomb. Quick way to get strength and volume without breaking the bank on consumables. Occasionally, one can see a stray thread crossing the interior of the honeycomb, so it isn't necessary to get it 100% on the inside.
|
|
|
Logged
|
|
|
|
lab-dad
|
 |
« Reply #81 on: June 26, 2015, 07:52:49 PM » |
|
Thats the way the one at work prints using abs melted to form the shapes. The resolution is not high enough for our needs even in 1/16.
I did a foundation in 1/32 for Jerry that looked good but being "rough" made it look like formed concrete.
Mj
|
|
|
Logged
|
|
|
|
Franck Tavernier
|
 |
« Reply #82 on: June 28, 2015, 01:53:58 AM » |
|
I think in 1:32, you will not succeed to have thicknesses to scale for the guard. Furthermore, the resin may be too fragile and brittle! A Plymouth DL type  The guard  Interior cab will be probably like this   Franck
|
|
« Last Edit: June 28, 2015, 05:32:57 AM by Franck Tavernier »
|
Logged
|
|
|
|
marc_reusser
|
 |
« Reply #83 on: July 04, 2015, 10:02:38 PM » |
|
Sorry I haven't gotten back to here for a while life and work have been very crazy.
Russ, if you want me to sent you that parts file so you can print it as a test I can do so. If you want when I get a moment I can scale it down and put it on a sprue...or you can. Let me know.
|
|
|
Logged
|
I am an unreliable witness to my own existence.In the corners of my mind there is a circus....M-Works
|
|
|
lab-dad
|
 |
« Reply #84 on: July 27, 2015, 04:29:07 PM » |
|
Marc, I'll take whatever you got! -Marty
|
|
|
Logged
|
|
|
|
|