Westlake Publishing Forums

General Category => Modellers At Work => Topic started by: Rail and Tie on December 23, 2021, 11:20:28 AM

Title: General Store in HO, Cogar, Oklahoma
Post by: Rail and Tie on December 23, 2021, 11:20:28 AM
Here are the first details that I have put together for the General Store.  I glued the micro LED upside down (meaning the lens toward the roof) in the phone booth. This cut the intensity and made an even glow for illuminating the "Telephone" signage.

Still have to add the "Have a Coke" decals to the sides of the vending machine. That and I just realized I engraved the tapered louvers on the pop machine upside down! DOH!
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Bill Gill on December 23, 2021, 06:37:35 PM
Those look really good. Are they laser cut?
Perhaps the Coke machine was originally destined for the Southern hemisphere?
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Barney on December 24, 2021, 10:12:57 AM
Miniature Marvels   
Never mind Im sure we all have upside down experiences !!!!! time and time again
Barney
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: finescalerr on December 24, 2021, 11:50:08 AM
You must have needed a microscope to build such perfect tiny models. -- Russ
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Rail and Tie on December 24, 2021, 02:48:31 PM
Russ, I don't use my microscope much any more, but pretty much live with my optivisor on.

Bill, the Pop machine is laser cut and engraved polybak shell over a basswood core. The payphone is 3D printed and phonebooth is laser cut polybak and Duralar with laser printed signage.

I still have to create "Have a Coke" decals for the sides of the machine and am working on bottles and crates to go along with the machine.
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Ray Dunakin on December 24, 2021, 09:30:54 PM
They both look great, especially for such a small scale!
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Bernhard on December 25, 2021, 01:58:59 PM
Yes, really impressive in H0!

Bernhard
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: WP Rayner on December 29, 2021, 01:13:25 PM
Nicely done Darryl... hard to believe they're in HO scale.
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Rail and Tie on December 30, 2021, 11:49:44 AM
and now the crates and pop bottles to go with the machine.

3D printed crates in grey resin. The bottles are printed in green clear resin.
Photoshopped crate decals over the resin casting.
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: finescalerr on December 30, 2021, 04:52:15 PM
That is about the coolest HO scale detail I've ever seen. -- Russ
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Ray Dunakin on December 30, 2021, 08:54:39 PM
Those crates and bottles are amazing!
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Bill Gill on December 31, 2021, 06:03:32 AM
Wow, Darryl those are phenomenal!
Do you have any "leftovers"???
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Chuck Doan on December 31, 2021, 09:24:16 AM
Outstanding! Wow.
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: TRAINS1941 on December 31, 2021, 03:15:12 PM
That is really excellent!!

Jerry
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Bernhard on January 02, 2022, 01:37:23 PM
You are a master of miniaturization!

Bernhard
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Design-HSB on January 03, 2022, 04:11:49 AM
Nice to see what is technically possible in the meantime. Thanks for showing.
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: 1-32 on January 08, 2022, 03:02:50 PM
Hi Mr Tie .
How are you wonderful detail items really well done.
cheers
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Barney on January 09, 2022, 04:40:00 AM
I think I need a new eye test - such detail on such a small scale - excellent
Barney
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Rail and Tie on January 13, 2022, 02:46:09 PM
next stage of building the store is complete.

not happy with the faded store sign but it will have to do for now.
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Rail and Tie on January 13, 2022, 02:47:25 PM
a few more WIP
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Rail and Tie on January 13, 2022, 02:55:52 PM
The gas pump has a core of two layers of matboard, with graphics glued to them. Then a layer of polybak, add the glazing. Then the outer panel. There are a total of 17 parts to this little pump.
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Hydrostat on January 14, 2022, 02:58:26 AM
Darryl,

those miniatures really are amazing! Concerning the Coke crates there's rather a limitation by the printer's capabilities than your's!
Don't know if the facade is the final state, but maybe you might close the small gap at the building's edge?

Cheers
Volker


Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Bernhard on January 14, 2022, 01:58:56 PM
That's really impressive, Darryl. It's almost too bad that you can barely see all these subtleties to the naked eye.

Bernhard
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Lawton Maner on January 14, 2022, 04:55:18 PM
You have won the prize for modeling madness with this jewel!       
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Chuck Doan on January 16, 2022, 10:47:58 AM
This is a favorite subject for the abandoned photogs. Nice to see it as a going concern. 
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Barney on January 16, 2022, 01:55:19 PM
The faded sign looks fine its a nice weathered look  and the detail for the inside amazing !
Barney
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Rail and Tie on January 17, 2022, 07:26:39 PM
Thank you for the compliments. Coming from this group, I take it as a very huge compliment.

Volker, I noticed that too as soon as I took the picture. Will patch it up before the building inspector sees the crack...
I printed those decals at 1200x1200DPI and the magnification of the lens sure spoils the effect. I agree that this is at the scale limitation of what is repeatable for a kit.

Bernhard. That is what I do. Make useless detail that will take you hours to create and no one will actually see anyways! I designed our lineside toolhouse with trusses and framing that you won't see unless you model it with the door open.

Lawton, thanks and believe it or not, this is the way the kit will be released as well. Hopefully not to the frustration of too many modelers.

Chuck, I was watching Rain Man a while back and when I saw the scene with Hoffman and Cruise stuffed in the phone booth and the 49 Roadmaster out front, I had to model it. I would love to model this as derelict as the store stands today, but I needed something more "functional" for the model railroad crowd.

Thanks for the comments Barney. I guess I have just been looking at that sign too much. The interior details are a fun little build to build them all up.
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Ray Dunakin on January 17, 2022, 07:48:33 PM
Beautiful work, and the tiny details are amazing!
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: Bill Gill on January 18, 2022, 12:02:45 PM
Darryl, Your store and all the accompanying details are terrific!.
You might be able to do a little bit to the sign to make it more pleasing to you.
I'm far from a sign painter, but did do a number of sign at an outdoor museum and that got me looking at old signs and how they weather.

To me the sign has an overall too evenly faded look, both background and letters. Also black sign paint usually fades a lot less than other colors. More often it's a "wash" of chalky white from the background that coats the lettering and by the time it appears as light as your sign there is usually other paint failures as well. That's what is missing from your sign.

Here are 3 signs I did. The first two face almost South, so get a lot of direct sun and the temperature range of that wall varies a lot especially in the winter. That lead to the wall paint cracking and chipping.And that tends to be more irregular than your sign. The third sign isn't in as much sun, but got a lot of wind blown grit hitting it..

I think you could add the effect of some of the cracking and worn paint with just a little work with gray, black and white artist pencils. You wouldn't need to give the sign a completely worn out look, just 'chip' and vary the color here and there to lessen the  overall "smoothness" of it.


I printed those decals at 1200x1200DPI and the magnification of the lens sure spoils the effect. I agree that this is at the scale limitation of what is repeatable for a kit. Darryl
What was the resolution of the original images you used for the decals? Some modelelers told me in a workshop that they had pixelated lettering on small signs even though they had printed them at 1200dpi. But it turned out that the original image they used was only 72 dpi, so they wound up printing a very high resolution copy of a low resoluion image.
Title: Re: General Store in HO, Cogar, Oklahoma
Post by: WP Rayner on January 21, 2022, 10:33:54 AM
Beautiful work Darryl... can't believe it's in HO scale.