Westlake Publishing Forums

General Category => Modellers At Work => Topic started by: mad gerald on July 28, 2011, 02:34:36 AM



Title: 1/22,5 Struppe Battery Locomotive of Lainz/Vienna
Post by: mad gerald on July 28, 2011, 02:34:36 AM
G'day all,

this is about another project of mine, the Struppe Battery Locomotive, serving the Geriatriezentrum in Lainz, Vienna.

The Struppe locos where manufactured by an engineer Mr. Struppe, running his father's mechanical engineering company (GEBUS Lokomotivservice) in Vienna, who (the father) was a former co-worker of GEBUS (locomotive works). There were only 3 prototypes built - the third one was a copy of the first two, because the plans did not exist anymore when it was built.

So information was hard to get and collection of information (and dimensions) kept me (and a dozen friendly and very helpful people even in Vienna itself) busy for months.

In case of interest additional information can be found on my website *here* (http://www.feldbahnmodellbau.de/viewtopic.php?f=15&t=15&start=0) and *here* (http://www.feldbahnmodellbau.de/viewtopic.php?f=16&t=16&start=0)and at the *gnATTERbox* (http://forum.gn15.info/viewtopic.php?t=5398&start=0&postdays=0&postorder=asc&highlight=struppe) and the forum kipplore.de (http://feldbahn.forumieren.com/t3575-die-feldbahn-im-geriatriezentrum-lainz-wien) as well.

CAD-Drawings and milling-work = support by Frithjof

I put the modell away for about a year because of a lack of time and because my skills (especially in soldering and CAD-drawing) were not developed/improved enough ... ::)

This is how it looked like before I stored it:

Bild 06-0018
(http://www.feldbahnmodellbau.de/gallery/image.php?album_id=6&image_id=80)

As I pulled it out of the box I discovered, that the styrene (1mm) has somehow got out of shape in the lower areas around the axle boxes ...  :P ... even I stored it in a dark and cool place ...

Bild 06-0023
(http://www.feldbahnmodellbau.de/gallery/image.php?album_id=6&image_id=323)

May be some solvent/component of the liquid styrene glue is to blame!  >:( I guess it wouldn't happened if I had chosen brass instead if styrene ...

Have to think about a solution, may be some supportive (brass) rods or a (brass) subframe ..?!?!?



Title: Re: 1/22,5 Struppe Battery Locomotive of Lainz/Vienna
Post by: lab-dad on July 28, 2011, 07:53:54 AM
Why not do it out of sheet brass?
If you have CAD drawings of the superstructure/frame photoetch might be easy, or CNC for sure.
The additional weight of the brass is also an advantage.
BTW, nice looking lokie!
-Marty